Instruments and controls 73
Trip computer
Each time
MODE
is pressed the trip
computer displays changes in the
following sequence:
1. Driving distance for
remaining fuel
2. Average speed
3. Driving time
4. Average fuel consumption
To reset average speed, driving time
or average fuel consumption, press
MODE
for more than 2 seconds.
To change the display from km to
miles or from °F to °C:
1. Press
SET
for more than
2 seconds.
The temperature display will
refresh.
2. Press
SET
again.
The distance display will refresh.
3. Press ▲ and ▼ to change km,
mile or °F, °C.
Driving distance for
remaining fuel
km
• Estimates driving distance to an
empty fuel tank from the current
fuel level.
• When the distance to empty
is less than 50 km, --- will be
displayed.
The driving distance for remaining
fuel may differ depending on:
• Driving conditions
• Driving pattern
• Vehicle speed
Average speed
km/h
• Shows the average speed of the
vehicle.
• To reset the average speed to
zero, press
MODE
for more than
2 seconds.
Driving time
• Shows the total drive time.
• To reset the driving time to zero,
press
MODE
for more than
2 seconds.
• The display will revert to 0:00
after 99:59 is displayed.
BOOK_MY14_CAPTIVA 7.indb 73
19/11/2013 2:56:55 PM