HOLDEN CG CAPTIVA 7 Owner'S Handbook Manual Download Page 216

Page: 216 / 257

214 Vehicle care

Engine compartment

• Diesel auxiliary fuse block (A)
• Engine compartment fuse

block (B)

The engine compartment may have

a diesel auxiliary fuse block.
The fuse blocks contain circuit fuses,

main fuses and relays.
To remove the cover:
1. Press the catch on the side

of the fuse block towards the

engine.

2. Release the two tabs at the

opposite side.

Electrical system

Fuses and relays

Fuse block

Fuse blocks are located:
• In the engine compartment
• In the floor console on the

driver side

Spare fuses and a fuse extractor are

located in the engine compartment

fuse block.

Relays

Relays are located in the engine

compartment fuse block.
Their position and function is shown

on the inside of the fuse cover.

A blown fuse

1.  Pull out the suspect fuse.
2.  Examine the wire in the fuse.
  A blown fuse can be recognised

by its melted wire (A).

If a fuse blows twice in a row,

contact a Holden Dealer.

BOOK_MY14_CAPTIVA 7.indb 214

19/11/2013 2:57:13 PM

Summary of Contents for CG CAPTIVA 7


































































































































































































































































Search results

Summary of Contents for CG CAPTIVA 7

Reviews:

Related manuals for CG CAPTIVA 7

Brands by name

Popular brands

HOLDEN CG CAPTIVA 7, Owner'S Handbook Manual

Search results

Summary of Contents for CG CAPTIVA 7

Reviews:

Related manuals for CG CAPTIVA 7

Brands by name

Popular brands