8 Channel 2.4 GHz Aircraft Computer Radio System
8 Channel 2.4 GHz Aircraft Computer Radio System
Section 6: Heli Programming Menu
Section 6: Heli Programming Menu
96
97
Revolution Mixing
The revolution mix is used to prevent yaw effects caused by changes in head speed or blade pitch on the
main rotor. The Flash 8 allows a five point curve to be set. It is not needed on helicopters equipped with a
heading hold gyro.
To configure a revolution mix:
1. From the Model menu, rotate the jog dial to highlight “REVO
Mix” and press the jog dial once to enter the activation menu.
2. Press the jog dial again to activate the menu.
3. Rotate the jog dial to select ACT (activate), then press the jog
dial to confirm your selection and activate the GYRO menu.
Revolution Mixing cont.
6. Scroll to the “2” field and press the jog button to activate the
menu.
7. The left field is the tail rotor pitch and the right field is the
throttle position. Highlight each field individually and input the
desired values for the first point of the curve.
8. Press the back button to return to the REVO Mix menu.
4. Scroll to the “1” field and press the jog button to activate the
menu.
5. The left field is the tail rotor pitch and the right field is the
throttle position. Highlight each field individually and input the
desired values for the first point of the curve.
11. Scroll to highlight the “EXP” field and press the jog dial to
activate the menu.
12. Rotate the jog dial to increase (clockwise) or decrease
(counter-clockwise) the desired exponential value for this mix.
This value does not affect exponential throw of the servo with
rudder stick commands. Press the jog dial to confirm your input.
9. Repeat steps 4-8 to input the values for each point of the mix curve.
10. Press the back button to return to the REVO Mix menu.
13. Scroll to highlight the “OST” (Offset) field and press the jog
dial to activate the menu.
14. Scroll to select the desired amount of offset and press the
jog dial to enter your selection.
15. Scroll to highlight “S/W” and press the jog dial to activate the
switch menu.
16. Scroll to select a switch to activate the camber mix. Press the
jog dial to confirm your selection.
a. If you choose the “NULL” option, revolution mix will remain
active at all times for this model.
