8 Channel 2.4 GHz Aircraft Computer Radio System
8 Channel 2.4 GHz Aircraft Computer Radio System
Section 4: Common Model Programming Menu
Section 4: Common Model Programming Menu
54
55
Programmable Mixes cont.
21. Press the jog dial again to enable selections in the S/W menu.
22. Scroll to select the switch that you will use to activate the
mix and press the jog dial to confirm your selection. If “NULL” is
selected, the mix will always be active.
23. If you selected a switch, the switch position menu will appear.
Scroll to highlight the switch position(s) that you will use to enable
the mix. Press the jog dial to confirm your selection.
24. Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the top
right corner of the screen will indicate if the mix is on or off.
25. Press the back button to return to the programmable mix
sub-menu.
26. Set up programmable mix in accordance with a Flight
Condition:
− The upper right field of the menu displays which Flight
Condition is currently active and will be programmed.
− Scroll to the Flight Condition field and press the jog dial to
activate the menu.
− Choose the desired flight condition and press the jog dial to
confirm your selection
− Repeat steps 9-24 to define the settings for each flight
condition.
27. Press the back button to return to the model function menu.
28. To inhibit this mix, scroll to the “MIX” field and press the jog
dial to activate the menu.
29. Scroll to select “INH” and press the jog dial to confirm your
selection.
30. Press the back button twice to return to the model function
menu.
Timers
2. Scroll to highlight “INH” under TIMER-1 and press the jog dial
to activate the menu.
3. Scroll to select “ACT” (active) and press the jog dial to confirm
your selection.
The Flash 8 features two customizable timers that can be triggered by switches or the throttle position.
Downward counting timers can be helpful in making sure that you land before running out of fuel or
battery power. You could also use an upward counting timer to measure the duration of your glider
flights. Both timers are displayed on the home screen.
To configure a timer:
1. From the model menu, scroll to highlight “TIMER” and press
the jog dial once to enter the timer menu.
You can also enter the timer menu directly from the home screen. Scroll to highlight a timer on
the screen and press the jog dial.
Warning
Note
Tip
Tip
Tip
Caution
4. Scroll to highlight “TIME” and press the jog dial to activate the
menu.
5. Press the jog dial again to activate the minute field.
6. Scroll to select the desired start value for minutes on Timer-1
and press the jog dial to confirm your selection.
7. Scroll to highlight the seconds field and press the jog dial to
activate the menu.
8. Scroll to select the desired start value for seconds on start
Timer-1 and press the jog dial to confirm your selection.
9. Press the Back button to return to the timer menu.
