8 Channel 2.4 GHz Aircraft Computer Radio System
8 Channel 2.4 GHz Aircraft Computer Radio System
Section 4: Common Model Programming Menu
Section 4: Common Model Programming Menu
52
53
Programmable Mixes cont.
9. Rotate the jog dial to increase (clockwise) or decrease
(counter-clockwise) the desired left, right(AILE,RUDD) or up,
down(ELEV) servo movement for the slave function. Press jog
dial to confirm your input.
10. Rotate the jog dial to increase (clockwise) or decrease
(counter-clockwise) the desired right (AILE, RUDD) or down
(ELEV) servo movement for the slave function. Press the jog dial
to confirm your input. Press the Back button to return to the
programmable mix sub-menu.
See the “D/R & EXP” menu on pages 47-49 for more information about exponential rates.
Note
Tip
Tip
Tip
Caution
12. Rotate the jog dial to increase or decrease the desired
amount of exponential throw on the slave servo when operating
with the mix. Press the jog dial to confirm your input.
11. Scroll to highlight the “EXP” (exponential) field and press the
jog dial to activate the menu.
6. Scroll to select the desired function to be the slave function
for the mix and press the jog dial to confirm your selection. Press
the back button to return to the programmable mix sub-menu.
7. Scroll to highlight the “RATE” field and press the jog dial to
activate the menu.
8. Rotate the jog dial to highlight the “L/U” (left/up), the “R/D”
(right/down) field, or both fields. If you want the mix affect
the movements of the slave servo equally in both directions,
highlight both fields and press the jog dial. Otherwise you can
adjust the values individually.
Programmable Mixes cont.
13. Scroll to highlight the “OST” (offset) field and press the jog
dial to activate the menu.
14. Rotate the jog dial to increase or decrease the desired
amount of offset between the master and slave channels when
operating with the mix. Press the jog dial to confirm your input.
15. The “I/O” (input/output) field is for display only. It shows
the value of the master and slave channels as you actuate the
relevant controls. These values are reflected in the graph as well.
16. Scroll to highlight the “SPEED” field and press the jog dial to
activate the menu.
17. Rotate the jog dial to increase or decrease the transit time of
the slave servo (in seconds) when operating with the mix. Press
the jog dial to confirm your input.
18. Scroll to highlight the “TRIM” field and press the jog dial to
activate the menu. With this feature enabled, the slave feature
will respond to trim changes as well as control inputs for the
master feature. When disabled, the slave feature ignores trim
changes and reacts only with control inputs to the master feature.
19. Rotate the jog dial to select “OFF or “ON” and press the jog
dial to confirm your input.
20. Scroll to highlight “S/W” (switch) and press the jog dial to
activate the menu.
