8 Channel 2.4 GHz Aircraft Computer Radio System
8 Channel 2.4 GHz Aircraft Computer Radio System
Section 4: Common Model Programming Menu
Section 4: Common Model Programming Menu
56
57
Timers cont.
10. Scroll to highlight “MODE” and press the jog dial to activate the
menu.
11. Scroll to select “UP” or “Down” and press the jog dial to
confirm your selection.
12. Scroll to highlight “S/W” and press the jog dial to activate the
menu.
13. Press the jog dial again to activate the switch selection sub-
menu.
14. Scroll to select the desired activation switch for the timer.
Press the jog dial to confirm your selection.
a. Selecting “NULL” will cause the timer to be inactive.
b. If you selected a switch, the switch position menu will appear.
- Scroll to highlight the switch position(s) that you will use to
activate the timer.
- Press the jog dial to confirm your selection.
- Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the top
right corner of the screen will indicate if the mix is on or off.
- Press the back button to return to the programmable mix sub-
menu.
c. If you selected “THR”, the throttle position menu will appear.
- Scroll to highlight the top “OFF” field and press the jog dial to
confirm your selection.
Timers cont.
- Scroll to select “ON” and press the jog dial to confirm your
selection.
- Scroll to highlight the middle field and press the jog dial to
activate the menu.
- Move the throttle stick to the position where you want the
timer to turn on. We suggest a position just above idle. Note the
double line on the screen moves in conjunction with the throttle
stick position.
- Scroll to raise the bar on the screen to the double line. Press the jog
dial to confirm your selection. The timer will run when the throttle is
at or above this setting. It will pause when the throttle is below this
setting. If you cycle the throttle position, the field in the top right
corner of the screen will indicate when the timer turns on and off.
- Press the back button to return to the timer sub-menu.
To reset a timer:
1. From the home screen, scroll to highlight a timer and press the
jog dial once to enter the timer menu.
2. Scroll to highlight “TIME” and press the jog dial to activate the
menu.
3. Press the back button twice to return to the home screen.
The Monitor function will display a graphic representation of all eight channels as they are manipulated
with the Flash 8’s controls. There are also channel cycling and neutralization functions.
Servo Monitors
1. From the model menu, scroll to highlight “MONITOR” and press
the jog dial once to enter the monitor menu.
2. Manipulate the control inputs (including dual-rate switches)
and observe the bar graphs indicate the movement for each
channel. This screen is useful to verify that each channel is
configured with the intended end points and dual rates.
