3.2 Automatic Continuous Measurement (6-cell auto mode)
3 - 94
NOTE
:
In WL Scan mode, the spectrum of each sample
cannot be automatically saved. So the save or
print operation is required for each sample.
WL Scan
CELL A
START:Meas.; Select function.：_
□
1
Data □
2
Scale □
3
Save □
4
Print □
5
Baseline
Fig. 3-59 Screen after Sample Measurement
Table 3-41 Guidance after Measurement in WL Scan Mode
Setting Item
Description
[1] Data
You can perform each data processing. When this
function is selected, the following guidance appears.
Select function. : _
□
1 Trace □
2 Peak □
3 Smoothing □
4 List
For details of the function, refer to section 4.3.
[1] Trace
: Allows you to read out all the
measured data on the spectrum.
[2] Peak
: Displays the detected peak.
[3] Smoothing : Allows you to perform spectrum
smoothing.
[4] List
: Allows you to display the measured
data at the specified intervals.
[2] Scale
You can change the scale on the X axis and Y axis of
spectrum.
For detail of this function, refer to section 4.3.
400.0 525.0 650.0nm
ABS
0.800
0.000
