3.2.4
3 - 89
7.
Setting of Printing Conditions
GUIDE
: Specify print items if determined beforehand.
You can also specify print items after completion
of measurement. If you do not want to set the
printing conditions here, proceed to step 8.
(1) To set the printing conditions, press the <6> key (Print)
and then [ENTER] key. Or select “Print” with the [
▲
]
or [
▼
] key and press the [ENTER] key or [
►
] key.
(2) The printing condition (Print) screen (Fig. 3-55)
appears. Make your setting according to the
guidance. For details of each parameter, refer to
Table 3-40.
WL Scan
CELL A
1 Meas.PARAM.
Auto Print
OFF
2 Sample
Print Date ON
3 6 Cell
Run Date ON
4 System
Method
ON
5 Peak PARAM.
Graph
ON
6 Print
Peak Table ON
7 Save Method
Data List OFF
8 Meas.Screen
Select function. : _
□
1
ON □
2
OFF
Fig. 3-55 Printing Condition (Print) Screen
(3) After completion of setting for Auto Print, Print Date,
Run Date, Method, Graph, Peak Table, Data List and
Int., return to the WL Scan screen by pressing the
[RETURN] key or [
◄
] key.
