3.2.1
3 - 9
4.
Setting of Calibration Curve Conditions
(1) To set the calibration curve conditions, press the <3>
key (Curve) and then [ENTER] key. Or select “Curve”
with the [
▲
] or [
▼
] key and press the [ENTER] key or
[
►
] key.
(2) The calibration curve condition (Curve) screen (Fig. 3-
5) appears.
Photometry
CELL A
1 Meas.PARAM.
Curve Type
1st Order
2 Sample Thru Zero
ON
3 Curve
No.of STD
3
4 Curve Data Upper LMT． 9999
5 6 Cell Lower LMT. 0.000
6 System Unit Label mg/l
7 Print
8 Save Method
9 Meas.Screen
Select function. : _
□
1
1st Order □
2
Factor
Fig. 3-5 Calibration Curve Condition (Curve)
Screen
(3) To enter/select the calibration curve conditions, press
the [ENTER] key. Or select each item by pressing the
[
▲
] or [
▼
] key and make your setting. For details of
each parameter, refer to Table 3-3.
(4) After setting the calibration curve type (Curve Type),
through-zero function (Through Zero), upper
concentration limit (Upper LMT.), lower concentration
limit (Lower LMT.) and concentration unit (Unit Label),
return to the Photometry screen by pressing the
[RETURN] key or [
◄
] key.
