5.1.6
5.1.6 Hardware Check
(1) Display the screen for each item of instrument performance
check (Fig. 5-23). For display method, follow the
procedure starting from section 5.1.. Using the [
▲
]/[
▼
]
key, move the cursor to Hardware, and then select [1] Yes.
The hardware will be checked. If check is not desired
actually, select [2] No.
Performance
CELL A
WL Accuracy (484.6 nm)
WL Accuracy (229.0 nm)
WL Accuracy (822.8 nm)
WL Repeatability
Noise Level (RMS)
Baseline Flatness
Baseline Stability
Hardware
Print Report
Execute(Manual)? :：＿
□
1 Yes □
2 No
Fig. 5-23 Screen for Each Item of Instrument
Performance Check
(2) After the check of RAM, ROM, lamp, wavelength driver,
wavelength and lamp usage, the hardware check screen
(Fig. 5-24) is displayed. The check result of each item is
indicated here. For printing the measurement result, press
the <1> key (Print). After check, return to the performance
check item selecting screen by pressing the [RETURN] key.
Performance
CELL A
Hardware
RAM
OK
ROM
OK
Lamp
OK
Wavelength Driver
OK
WL Check
OK
Lamp Usage(%)
1
Select function. : _
□
1 Print
Fig. 5-24 Hardware Check Screen
5 - 19
