5.1
5. PERFORMANCE CHECK
This section pertains to the performance check method for
checking whether the instrument provides the specified
performance. For performance check with a pen type low-
pressure mercury lamp, a separately available option is required.
For mounting method of this lamp, refer to the instruction manual
for the separately available option.
5.1 Check with Instrument Main Unit Alone
(1) After startup of the instrument, press the [MAIN MENU] key
to display the Main Menu screen (Fig. 5-1). Confirm that
nothing is contained in the sample compartment and close
the lid. For selection of performance check, press the <7>
key (Performance) and then the [ENTER] key or press the
[
▲
]/[
▼
] key to select Performance followed by the [ENTER]
key.
Main Menu
CELL A
1 Photometry
2 WL Scan
3 Time Scan
4 Method Menu
5 Data Menu
6 System Setup
7 Performance
8 Data Display
Select function. : _
Fig. 5-1 Main Menu Screen
(2) The instrument performance check screen (Fig. 5-2)
appears.
Performance
CELL A
1 Performance Check(Auto)
2 Performance Check(Manual)
3 Performance Check(Option)
Select function. : _
Fig. 5-2 Instrument Performance Check Screen
5 - 1
