Hioki RM3542, Instruction Manual, Page: 59 / 218

4.9 Comparing the Measurement Settings of Two Instruments (Settings Monitor Function)
53
4
This function automatically compares the settings of two
instruments to determine whether they are the same.
Only those measurement settings affecting the compar-
ator and speed are compared. When the settings differ,
an alarm notification appears and subsequent
TRIG
sig-
nal input is prevented from starting measurement.
When the settings of two instruments match, TRIG input is
accepted and measurement starts. However, if the range
defined by the upper and lower thresholds of the second
stage is broader than that of the first stage, measurement still
starts despite the different threshold settings.
4.9 Comparing the Measurement Settings of
Two Instruments
(Settings Monitor Function)
1st Stage
2nd Stage
Transport Direction
A B C D E
Automatic
Comparison
1
Connect the two instruments
’
SET MONITOR connectors together using a Hioki 9637
RS-232C cable.
2
Open the Basic Settings screen.
3
Open the System screen.
4
Enable the function on both instruments.
The SET MONITOR connectors are identical
to RS-232C connectors. Be careful to avoid
connecting the wrong connectors.
The Basic Settings screen appears.
The System screen appears.
[SYSTEM]
1
Selection
2
Selection
1
2
Disables the function (default)
Enables the function