Hioki LR8431, Instruction Manual

Page: 56 / 204

3.3 Setting Configuration 1 – Recording Settings
48
During real-time saving, removable storage can be replaced without interrupting mea-
surement. This procedure describes replacing a USB flash drive.
Replacing Removable Storage During Real-Time Saving
Move the cursor to [EJECT] .
Execute
Insert a formatted removable

storage.
Measurement data acquired while the de-
vice was removed is automatically written.

See: Formatting: (p. 95)

Insertion: (p. 94)
Remove the USB flash drive (p. 94).
Right bottom of the screen
Move the cursor to

[Unmount USB memory] .
Execute
Move the cursor to [Yes] .
Execute
Bottom of the screen
When both a CF card and USB flash drive are in-
stalled and either is removed, the save destina-
tion automatically switches to the remaining
media.
Execute
The media icon display will
change to the eject display.
• If a storage device is not replaced within two minutes after selecting
"Yes" in the "Do you want to remove the USB memory/CF card?" con-
firmation dialog, data may overflow internal memory and be lost.
• If a storage device is replaced during real-time saving, data is saved
to a new file.
• If measurement ends while the removable storage is ejected, even if a
removal storage is then inserted, the remaining data is lost. If
this occurs, the measurement data remaining on the
instrument can be retrieved with the manual save function.
See:
6.3, "
Saving Data
" (p. 96)
.