Hioki LR8431, Instruction Manual

Page: 124 / 204

7.1 Calculation Methods
116
After measuring, calculation can be applied to a specified time span.
Make any other calculation settings before specifying the calculation time span (p. 115).
Apply Calculations to a Specific Time Span

(Manual Calculation Only)
1
3
Position the A/B cursors to define the calculation time
span.
To select which cursor to move: (p. 86)
Select the [Span] setting
option
2
Apply
Open the setting options
for the item to be set.
Select the calculation time
span
All, A-B, Start-A, Start-B,

A-End, B-End
Select [Switch to Calc] .
Apply
4
Select [Exec] .
Apply
The results of calculations
are displayed.
Display A/B Cursors.
3
4
When you select [Switch to Calc] the calculation display screen appears, and A/B cur-
sor motion is enabled. However, changing to the [Wave+Calc] display hides the A/B
cursors (so they are not movable), although the calculation range can still be changed.
• All : The entire acquired waveform
• A-B : The time span between cursors
A and B
• Start-A :From the start of the acquired
waveform to cursor A
• Start-B :From the start of the acquired
waveform to cursor B
• A-End : From cursor A to the end of the
acquired waveform
• B-End : From cursor B to the end of the
acquired waveform