Hioki LR8431, Instruction Manual

Page: 4 / 204

Contents
ii
Chapter 3

Setting before Measurement_______________ 37
3.1 Pre-Operation Inspection ....................................... 37
3.2 Operating Flow Overview ....................................... 38
3.3 Setting Configuration 1 – Recording Settings ..... 42

Specify the Recording Interval ......................................... 42

Setting the Display Time Base (horizontal axis

magnification,set as needed) ........................................... 43

Selecting the Recording Start/stop Method ..................... 44

Set the Recording Length for Repeated or One-time

Recording ......................................................................... 45

Enable Digital Filtering (noise suppression) (as needed) 45

Automatic Saving ............................................................. 46

Replacing Removable Storage During Real-Time Saving 48
3.4 Setting Configuration 2 – Input Channel Settings 49

Voltage Measurement Settings ........................................ 50

Temperature Measurement Settings ............................... 51

Integration (Count) Measurement Settings ...................... 53

Revolution Measurement Settings ................................... 54
3.5 Display Settings ...................................................... 56

Selecting Waveform Display Color .................................. 56

Specifying Vertical Display Range by Magnification and

Zero Position (vertical axis expansion/compression) ....... 56

Specifying the Vertical Display Range by Upper and

Lower Limits (expansion/compression) ............................ 57

Converting Units (Scaling function) .................................. 58
3.6 Entering Comments ................................................ 60
3.7 Viewing All Channel Settings in a List .................. 62

Batch Copying Channel Settings ..................................... 63

Batch Setting Waveform Display/Hide and Waveform

Color Settings for All Channels ........................................ 63

Initializing Settings (to factory defaults) ........................... 64

Aligning Zero Positions on the Grid ................................. 64

Display Celsius (°C) temperature values as

Fahrenheit (°F) ................................................................. 65