manualshive.com logo in svg

Hill-Rom 4038110, Instruction Manual

Share
Download
Hill-Rom 4038110 Instruction Manual Download Page 79

1 2  Adjustments

55000-00011_002_01 – 1756789 – 2017-09-06

79

Figure 45

12.7.8  Setting the cardan joint axis braking force on 

the standard light head with camera

Adjusting the friction brake 

E 

for the light head on the handle 

attachment. If the friction brake can no longer be adjusted, an 
internal brake strip must be replaced by a service technician.

1. Pull the sterile handle ① off the camera.
2. Remove camera ② from camera mount ③ (See 

TruVidia SD/HD/3D instruction manual).

3. Unscrew the four countersunk screws with cross-heads 

⑧ and remove the cover of handle a achment ⑦.

4. Evenly turn the M6 threaded pins with Allen key ⑥ 

 

(6 mm) in adjustment hole ⑤.

Reducing the braking force

• Turn the adjustment screw to the left (anti-clockwise).

Increasing the braking force

• Turn the adjustment screw to the right (clockwise).

5. Put on handle a achment cover ⑦ and screw in the 

four countersunk screws with cross-heads ⑧.

6. Check the firm fastening of handle a achment cover ⑦.
7. First couple on camera ③ and then put the sterile 

handle ① on the camera.

8. Carry out a function test of the braking force.

Summary of Contents for 4038110





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands