manualshive.com logo in svg

Hill-Rom 4038110, Instruction Manual

Share
Download
Hill-Rom 4038110 Instruction Manual Download Page 57

57

8  Operation

55000-00011_002_01 – 1756789 – 2017-09-06

8.9.4

 Adjusting the light intensity with Adaptive Light Control plus

 

(ALC plus)

Adaptive Light Control plus (ALC plus) has the same functionality as Adaptive Light 
Control (ALC), but also enables the targeted electronic control of various LEDs in 
order to achieve optimum illumination of the wound area.

Damage to vision

Direct contact with the laser beam may cause damage to 
vision:

• Do not look directly into the laser beam
• Protect the patient's eyes: 

 

Close the patient's eyes or protect them as necessary (e.g. with 
safety goggles with an optical density of at least 2 or designed 
according to protection level 6 EN169).

• Use of operating methods or procedures other than those stated in 

these instructions for use may result in dangerous radiation effects 
due to the laser.

ALC plus function

The Adaptive Light Control plus (ALC plus) function is only available for 
light models TruLight 5x10 and TruLight 5x20.

Camera system

Adjusting the light intensity for camera system with Adaptive Light Control 
plus (ALC plus)

The functionality of Adaptive Light Control plus (ALC plus) in the camera is based on 
evaluating image signals.

• If the light head is repositioned during surgery, the measuring mode of the 

camera is activated and automatically remeasures the distances between the 
light head and the wound area. 

• The light intensity is automatically adapted to the working distance on the basis 

of the established measurement data (see also instruction manual: TruVidia SD 
or TruVidia HD).

WARNING 

NOTE

Summary of Contents for 4038110





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands