manualshive.com logo in svg

Hill-Rom 4038110, Instruction Manual

Share
Download
Hill-Rom 4038110 Instruction Manual Download Page 52

52

8  Operation

55000-00011_002_01 – 1756789 – 2017-09-06

Figure 26

8.6

Switching the light head on/off

The lighting system is switched on in two stages:

• Switch the power supply of the lighting system to standby,
• Switch on the light head

Switch the power supply to Standby
Ceiling-mounted and wall-mounted versions:

 

• Switch on the operating theatre master switch. 
→ The power supply of the lighting system is in Standby.

Mobile stand version: 

• Connect the mains cable and switch on the power supply. Set the switch to 

Position I (see Chapter 6.3.1, page 46),

→ The power supply of the mobile lighting system is in Standby.

Switching on the light head

• Press the ON / OFF bu on ①:
→ The two ligh ng modules ③ of the light head light up.

Switching off the light head

• Press the ON / OFF bu on ①.
→ The two ligh ng modules ③ of the light head go out.

8.7

Disconnecting the power to the lighting system

Ceiling-mounted and wall-mounted versions

• Switch off the operating theatre master switch.
→ The lighting system is disconnected from the power supply.

Mobile stand version

• Switch off the power supply unit, position the switch in Position 0 (see Chapter 

6.3.1, page 46), pull the mains cable out of the safety socket.

→ The mobile lighting system is disconnected.

Summary of Contents for 4038110





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands