1 2 Adjustments
55000-00011_002_01 – 1756789 – 2017-09-06
78
Figure 44
12.7.7 Setting the braking force on the light head
SLC / ALC plus
Adjusting the friction brake
E
for the light head on the handle
attachment. If the friction brake can no longer be adjusted, an
internal brake strip must be replaced by a service technician.
1. Pull the sterile handle ① off the handle adapter.
2. Unscrew the four Allen screws ⑥ (M4 x 15 mm).
3. Remove the securing ring ⑤.
4. Remove cover of the handle a achment ④.
5. Evenly turn the two M6 threaded pins with Allen key ③
(6 mm) in adjustment hole ②.
Reducing the braking force
• Turn the adjustment screw to the left (anti-clockwise).
Increasing the braking force
• Turn the adjustment screw to the right (clockwise).
6. Put on the cover of the handle a achment ④.
7. Put on the securing ring ⑤.
8. Fasten the securing ring with the four Allen screws ⑥.
9. Check the firm attachment of the components.
10. Put the sterile handle ① on the handle adapter.
11. Carry out a function test of the braking force.
