manualshive.com logo in svg

Hill-Rom 4038110, Instruction Manual

Share
Download
Hill-Rom 4038110 Instruction Manual Download Page 68

55000-00011_002_01 – 1756789 – 2017-09-06

68

12

 

 Adjustments

Figure 33

12.1

Setting spring arm swivel range type 

 

AC 2000 LCH

The vertical swivel movement may only be adjusted within the 
range of +30° (upwards) and -45° (downwards). The swivel 
range can be set so that the collision with the ceiling or with 
bordering objects can be avoided (the swivel range can be 
restricted down to the horizontal level).

12.1.1  Disconnecting the power to the lighting 

system

Ceiling-mounted version

1. Switch off the operating theatre master switch.
→ The lighting system is disconnected from the power 

supply.

2. Secure the master switch against accidental switch-on.

Mobile stand version

1. Switch off the power supply unit, position the switch in 

Position 0 (see Chapter 6.3.1, page 46), pull the mains 
cable out of the safety socket.

→ The mobile lighting system is disconnected.
2. Secure the mains plug against unintentional plugging-in.

12.1.2  Setting the swivel range

Removing the covers

1. Carefully press in and unlock the four lugs ① of the two 

halves of the cover ② with a suitable flat screwdriver.

2. Remove the two halves of the cover ②.

Adjusting the swivel range

3. Insert the a ached pin ④ (Ø4 mm x 110 mm) into the 

hole of the adjus ng nut in the adjustment opening ③.

Reducing the swivel range

• Turn the internally arranged adjusting nut to the right 

(clockwise).

Increasing the swivel range

• Turn the internally arranged adjusting nut to the left (anti-

clockwise).

Installing the covers

4. Place the halves of the cover ② on the spring arm and 

press the four lugs ① against the spring arm, so that 
they engage.

5. Check the firm a achment of the cover ②.
6. Carry out a function test of the swivel movement.

Summary of Contents for 4038110





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands