Figure 9-8 Set Authentication Parameters
Click Save to save the settings after the configuration.
Terminal
Choose Entrance or Exit for settings.
Enable Authentication Device
Enable the authentication function.
Continuous Recognition Interval
You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Note
The recognition internal value ranges from 1 to 10.
Authentication
Select an authentication mode according to your actual needs from the drop-down list.
Authentication Interval
You can set the authentication interval of the same person when authenticating. The same
person can only authenticate once in the configured interval. A second authentication will be
failed.
Alarm of Max. Failed Attempts
Enable to report alarm when the card reading attempts reach the set value.
Max. Authentication Failed Attempts
DS-K3B631TX Series Swing Barrier User Manual
71
Summary of Contents for DS-K3B631TX Series
