manualshive.com logo in svg

HIKVISION DS-K3B631TX Series, User Manual

The HIKVISION DS-K3B631TX Series is an exceptional security product that ensures reliable access control. For convenient usage and setup, we provide a comprehensive User Manual that can be easily downloaded for free from our website. Take advantage of the manual's detailed instructions and step-by-step guidance for optimal performance of your HIKVISION device.

Share
Download
background image

Set the timeout value when face recognizing. If the face recognition time is longer than the

configured value, the system will pop up a prompt.

Face without Mask Detection

After enabling the face without mask detection, the system will recognize the captured face

with mask picture or not. You can set face with mask1:N matching threshold, it's ECO mode, and

the strategy.
None

The function is disabled. The device will not detect whether a person is wearing a face mask

or not.

Reminder of Wearing

If the person do not wear the face mask when authenticating, the device will pop up a

prompt and the door will open.

Must Wear

If the person do not wear the face mask when authenticating, the device will pop up a

prompt and the door will keep closed.

Face with Mask 1:N Matching Threshold

Set the matching threshold when authenticating with face mask via 1:N matching mode. The

larger the value, the smaller the false accept rate and the larger the false rejection rate.

ECO Mode

After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low

light or dark environment. And you can set the ECO mode threshold, ECO mode (1:N), and ECO

mode (1:1).

ECO Mode (1:1)

Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger

the value, the smaller the false accept rate and the larger the false rejection rate.

ECO Mode (1:N)

Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger

the value, the smaller the false accept rate and the larger the false rejection rate

Face with Mask & Face (1:1 ECO)

Set the matching value when authenticating with face mask via ECO mode 1:1 matching mode.

The larger the value, the smaller the false accept rate and the larger the false rejection rate.

Face with Mask 1:N Matching Threshold (ECO Mode)

Set the matching threshold when authenticating with face mask via ECO mode 1:N matching

mode. The larger the value, the smaller the false accept rate and the larger the false rejection

rate.

DS-K3B631TX Series Swing Barrier User Manual

121

Summary of Contents for DS-K3B631TX Series















































































































































































Reviews:

No comments

Related manuals for DS-K3B631TX Series

Roger Technology ACS/BA/60 Instruction And Warnings For The Installer preview
ACS/BA/60
Brand: Roger Technology Pages: 32
Daewoo DWF-301AW Service Manual preview
DWF-301AW
Brand: Daewoo Pages: 38

Brands by name

Popular brands

Load more brands