Figure 9-4 Time Settings
Click Save to save the settings after the configuration.
Time Zone
Select the device located time zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device time should be synchronized manually. You can set the device time
manually or check Sync. with Computer Time to synchronize the device time with the
computer's time.
Server Address Type/Server Address/NTP Port/Interval
You can set the server address type, server address, NTP port, and interval.
9.6.3 Set DST
Steps
1. Click Configuration → System → System Settings → Time Settings .
2. Enable DST.
3. Set the DST start time, end time and bias time.
4. Click Save to save the settings.
DS-K3B631TX Series Swing Barrier User Manual
62
Summary of Contents for DS-K3B631TX Series
