manualshive.com logo in svg

HIKVISION DS-K3B631TX Series, User Manual

The HIKVISION DS-K3B631TX Series is an exceptional security product that ensures reliable access control. For convenient usage and setup, we provide a comprehensive User Manual that can be easily downloaded for free from our website. Take advantage of the manual's detailed instructions and step-by-step guidance for optimal performance of your HIKVISION device.

Share
Download
background image

Note

●

The duress code, super code, and dismiss code should be different.

●

The duress code, super password, and the dismiss code should be different from the

authentication password.

●

The length of duress code, super password, and the dismiss code is according the device,

usually it should contains 4 to 8 digits.

5. Click OK.
6. Optional: Click Copy to , and then select the door/floor(s) to copy the parameters in the page to

the selected doors/floor(s).

Note

The door or floor's status duration settings will be copied to the selected door/floor(s) as well.

Configure Parameters for Card Reader

After adding the access control device, you can configure its card reader parameters.
Before You Start

Add access control device to the client.
Steps
1. Click Access Control → Advanced Function → Device Parameter .
2. In the device list on the left, click   to expand the door, select a card reader and you can edit the

card reader's parameters on the right.

3. Edit the card reader basic parameters in the Basic Information page.

Note

●

The displayed parameters may vary for different access control devices. There are part of

parameters listed as follows. Refer to the user manual of the device for more details.

●

Some of the following parameters are not listed in the Basic Information page, click More to

edit the parameters.

Name

Edit the card reader name as desired.

OK LED Polarity/Error LED Polarity/Buzzer Polarity

Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the

card reader parameters. Generally, adopts the default settings.

Minimum Card Swiping Interval

If the interval between card swiping of the same card is less than the set value, the card

swiping is invalid. You can set it as 0 to 255.

Max. Interval When Entering PWD

DS-K3B631TX Series Swing Barrier User Manual

143

Summary of Contents for DS-K3B631TX Series















































































































































































Reviews:

No comments

Related manuals for DS-K3B631TX Series

Quax 06ESG20-00 Series Manual preview
06ESG20-00 Series
Brand: Quax Pages: 25
Nice X-BAR barrier Operation Manual preview
X-BAR barrier
Brand: Nice Pages: 2
LIFTGATOR TG-P Assembly & Operators Manual preview
TG-P
Brand: LIFTGATOR Pages: 17

Brands by name

Popular brands

Load more brands