HIKVISION DS-K3B631TX Series User Manual Download Page 100

Page: 100 / 174

None

The function is disabled. The device will not detect whether a person is wearing a face mask

or not.

Reminder of Wearing

If the person do not wear the face mask when authenticating, the device will pop up a

prompt and the door will open.

Must Wear

If the person do not wear the face mask when authenticating, the device will pop up a

prompt and the door will keep closed.

Face with Mask 1:N Matching Threshold

Set the matching threshold when authenticating with face mask via 1:N matching mode. The

larger the value, the smaller the false accept rate and the larger the false rejection rate.

Face with Mask & Face

The larger the value, the smaller the false accept rate and the larger the false rejection rate.

Face with Mask 1:N Matching Threshold

The larger the value, the smaller the false accept rate and the larger the false rejection rate.

Set Recognition Area

Click Configuration → Smart → Area Configuration .

Choose the card reader at the entrance or exit.

Drag the block to adjust the yellow frame in the live video as the recognition area. Only the face

within the area can be recognized by the system.

Click Save to save the settings.

Click

or to record videos or capture pictures.

9.6.16 Set Screen Display

You can set the display theme and the sleep time for the device.
Click Configuration → Preference → Screen Display .
Sleep

Enable Sleep and the device will enter the sleep mode when no operation within the configured

sleep time.

Display Theme

You can select display theme for device authentication. You can select Theme Mode as Default,

Advertisement or Simple. When you select Simple, the information of name, ID, face picture

will not be displayed.

DS-K3B631TX Series Swing Barrier User Manual

Summary of Contents for DS-K3B631TX Series















































































































































































Search results

Summary of Contents for DS-K3B631TX Series

Reviews:

Related manuals for DS-K3B631TX Series

Brands by name

Popular brands

HIKVISION DS-K3B631TX Series, User Manual

Search results

Summary of Contents for DS-K3B631TX Series

Reviews:

Related manuals for DS-K3B631TX Series

Brands by name

Popular brands