manualshive.com logo in svg

HIKVISION DS-K3B631TX Series, User Manual

The HIKVISION DS-K3B631TX Series is an exceptional security product that ensures reliable access control. For convenient usage and setup, we provide a comprehensive User Manual that can be easily downloaded for free from our website. Take advantage of the manual's detailed instructions and step-by-step guidance for optimal performance of your HIKVISION device.

Share
Download
background image

Set the matching security level when authenticating via 1:N matching mode. The larger the

value, the smaller the false accept rate and the larger the false rejection rate when

authentication.

Live Face Detection

Enable or disable the live face detection function. If enabling the function, the device can

recognize whether the person is a live one or not.

Live Face Detection Security Level

After enabling Live Face Detection function, you can set the matching security level when

performing live face authentication.

Max. Failed Attempts for Face Auth.

Set the maximum live face detection failed attempts. The system will lock the user's face for 5

minutes if the live face detection is failed for more than the configured attempts. The same

user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user

can authenticate via the real face twice continuously to unlock.

Lock Authentication Failed Face

After enabling the Live Face Detection function, the system will lock the user's face for 5

minutes if the live face detection is failed for more than the configured attempts. The same

user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user

can authenticate via the real face twice continuously to unlock.

Application Mode

You can select indoor or others application modes according to actual environment.

4. Click OK.
5. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to

the selected card reader(s).

Configure Parameters for Alarm Output

After adding the access control device, if the device links to alarm outputs, you can configure the

parameters.
Before You Start

Add access control device to the client, and make sure the device supports alarm output.
Steps
1. Click Access Control → Advanced Function → Device Parameter to enter access control

parameter configuration page.

2. In the device list on the left, click   to expand the door, select an alarm input and you can edit

the alarm input's parameters on the right.

3. Set the alarm output parameters.

Name

Edit the card reader name as desired.

DS-K3B631TX Series Swing Barrier User Manual

145

Summary of Contents for DS-K3B631TX Series















































































































































































Reviews:

No comments

Related manuals for DS-K3B631TX Series

Brands by name

Popular brands

Load more brands