manualshive.com logo in svg

HIKVISION DS-K3B631TX Series, User Manual

The HIKVISION DS-K3B631TX Series is an exceptional security product that ensures reliable access control. For convenient usage and setup, we provide a comprehensive User Manual that can be easily downloaded for free from our website. Take advantage of the manual's detailed instructions and step-by-step guidance for optimal performance of your HIKVISION device.

Share
Download
background image

Display the card information when authenticating.

Display Person Information

Display the person information when authenticating.

Overlay Person Info. on Picture

Display the person information on the captured picture.

Voice Prompt

If you enable this function, the voice prompt is enabled in the device. You can hear the voice

prompt when operating in the device.

Upload Pic. After Linked Capture

Upload the pictures captured by linked camera to the system automatically.

Save Pic. After Linked Capture

If you enable this function, you can save the picture captured by linked camera to the device.

Press Key to Enter Card Number

If you enable this function, you can input the card No. by pressing the key.

Wi-Fi Probe

If you enable this function, the device can probe the surrounding communication devices'

MAC address and upload the MAC address to the system. If the MAC address match the

specified MAC address, the system can trigger some linkage actions.

3G/4G

If you enable this function, the device can communicate in 3G/4G network.

NFC Anti-Cloning

If you enable this function, you cannot use the cloned card for authentication and further

enhance security.

4. Click OK.
5. Optional: Click Copy to, and then select the access control device(s) to copy the parameters in

the page to the selected device(s).

Configure Parameters for Door/Elevator

After adding the access control device, you can configure its access point (door or floor)

parameters.
Before You Start

Add access control device to the client.
Steps
1. Click Access Control → Advanced Function → Device Parameter .
2. Select an access control device on the left panel, and then click   to show the doors or floors of

the selected device.

DS-K3B631TX Series Swing Barrier User Manual

141

Summary of Contents for DS-K3B631TX Series















































































































































































Reviews:

No comments

Related manuals for DS-K3B631TX Series

Parking Facilities PF6000 Installation, Operation & Maintenance Manual preview
PF6000
Brand: Parking Facilities Pages: 50
CAME I1PB0500026 Installation Manual preview
I1PB0500026
Brand: CAME Pages: 28

Brands by name

Popular brands

Load more brands