Steps
1. On the device list page, tap the security control panel and then
log in to the device (if required) to enter the control panel
page.
2. Tap Zone to enter the zone list page.
3. Select a zone to enter the zone settings page.
4. Tap Link Camera to enter the Link Camera page.
Figure 4-43 Link Camera Page
5. Select a camera in the available cameras, and tap Link.
The selected camera will be linked to the zone. The icon will
be displayed on the right of the zone in the zone list. Tap the
icon to view the zone live video.
5 Operations
You can use the client keyfob, card, client software, or mobile
client to do arming, disarming, bypass, and zone disabling.
5.1 Arming
You can use keypad, keyfob, card, client software, mobile client to
arm your system.
After the arming command is sending to control panel, the sytem
will check the detector status. If the detector is in fault, you will
need to choose whether to arm the system with fault.
While the system is armed, the control panel will prompt the
result in 5s, and upload the arming report.
Figure 5-1 Arming Process
53