HIKVISION AXHub Manual Download Page 53

Page: 53 / 90

6. Follow the instructions. Enter the device alias and tap Save.

The control panel is listed on the device list page.

7. Optional: You can delete the device.

1) On the device list page, tap the security control panel and

then log in to the device (if required) to enter the partition

page.

2) Tap → Delete Device to delete the device.

4.4.4 Add Peripheral to the Control Panel

It is required to enter the activation name and the password login

the control panel after it being added. The tampering alarm will

not be detected within 5 minutes after you login the device as a

setter and does not operate the device.
Before You Start

Make sure the control panel is disarmed.

Steps

Note

Some control panel models do not support add zones or wireless

devices remotely. You should add them to the control panel

directly. For details, see the user manual of the wireless device.
1. On the device list, tap the security control panel and then log

in to the device (if required) to enter the Partition page.

2. Tap to enter the Scan QR Code page.
3. Scan the QR code of the peripheral.

Note

The QR code is usually on the back cover of the device.

4. Optional: If the QR code fails to be recognized, tap and enter

the serial number of the device, and then select the device

type.

Note

The serial number is usually on the back cover of the device.

5. Tap Add.

Note

• When the adding peripheral is a detector, the detector will

be linked to the zone. You can view the detector information

in the Zone tab.

• Up to 32 detectors can be linked to the zone.
The added peripheral will be listed in the Zone tab or the

Peripheral Device tab.

Note

One of the most important factors for a reliable wireless

installation is the signal strength between a wireless device and

the panel. If a device is out of range it will not be able to send

events to the control panel therefore it is recommended that a

signal strength test is performed before fixing devices into

place. The control panel has advanced signal strength

mechanism that operates by monitoring all inputs/bells on the

Summary of Contents for AXHub



























































































Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands

HIKVISION AXHub, Manual

Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands