HIKVISION AXHub Manual Download Page 49

Page: 49 / 90

If the user continuously input the incorrect password for

more than the configured times, the account will be locked.

Note

The administrator has two more attempts than the

configured value.

Locked Duration

Set the locking duration when the account is locked.

Note

The available locking duration is 5s to 1800s.

3. Click to unlock the account or click Unlock All to unlock all

locked users in the list.

4. Click Save.

Module Lock Settings

Set the module locking parameters, including the Max Failure

Attempts, and locked duration. The module will be locked for the

programmed time duration, once the module authentication has

failed for the amount of configured times.

Steps

1. Click System → Security → Module Lock Settings to enter the

Module Lock Settings page.

2. Select a module from the list, and click the Operation icon.
3. Set the following parameters of the selected module.

Max. Failure Attempts

If a user continuously tries to authentication a password for

more than the configured attempts permitted, the keypad

will be locked for the programmed duration.

Locked Duration

Set the locking duration when the keypad is locked. After the

configured duration, the keypad will be unlocked.

4. Click OK.
5. Optional: Click the Lock icon to unlock the locked module.

Figure 4-31 Module Lock Settings

System Maintenance

You can reboot the device, restore default settings, import/export

configuration file, or upgrade the device remotely.
Select the device and click Remote Configuration in the client

software, or enter the device IP address in the address bar of the

web browser. Click System → System Maintenance to enter the

Upgrade and Maintenance page.
Reboot

Click Reboot to reboot the device.

Restore Default Settings

Summary of Contents for AXHub



























































































Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands

HIKVISION AXHub, Manual

Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands