Note
By default, the port number for EHome is 7660.
6. Set an account, including the Device ID and Ehome Login
Password.
7. Click Save.
NAT
Universal Plug and Play (UPnP™) is a networking architecture that
provides compatibility among networking equipment, software
and other hardware devices. The UPnP protocol allows devices to
connect seamlessly and to simplify the implementation of
networks in the home and corporate environments.
Enable the UPnP function, and you don’t need to configure the
port mapping for each port, and the device is connected to the
Wide Area Network via the router.
Steps
1. Click Communication Parameters → NAT to enter the page.
Figure 4-12 NAT Settings
2. Check the checkbox to enable UPnP.
3. Optional: Select the mapping type as Manual
4. Set the HTTP port and the service port.
5. Click Save to complete the settings
What to do next
Enter the tasks the user should do after finishing this task
(optional).
4.3.2 Device Management
Zone
You can set the zone parameters on the zone page.
Steps
1. Click Device Management → Zone to enter the Zone page.
23
