HIKVISION AXHub Manual Download Page 51

Page: 51 / 90

• Zone: You can view the zone status, alarm status, detector

battery capacity, and signal strength.

• Siren: You can view siren status, battery status, and signal

strength.

• Relay: You can view relay status, battery status, and signal

strength.

• Keypad: You can view linking status, battery status, and signal

strength.

• Tag Reader(Card Reader): You can view linking status, battery

status, and signal strength.

• Battery: You can view the battery charge.
• Communication: You can view the wired network "STATUS",

Wi-Fi status, Wi-Fi signal strength, cellular network status, used

data, and cloud connection status.

4.4 Use Mobile Client

4.4.1 Download and Login the Mobile Client

Download the Hik-Connect mobile client from Google Play (for

Android) or App store (for iOS) and login the client before

operating the security control panel.

Steps

1. Search and download Hik-Connect mobile client from Google

Play (for Android) or App Store (for iOS).

2. Optional: Register a new account if it is the first time you use

the Hik-Connect mobile client.

Note

For details, see User Manual of Hik-Connect Mobile Client.

3. Run and login the client.

4.4.2 Activate Control Panel via Hik-Connect

Before You Start
• The control panel has been activated.
• The control panel has registered to Hik-Connect. For details,

see Mobile Client Registration.

Steps

1. Power on the control panel.
2. Select adding type.

Tap → Scan QR Code to enter the Scan QR code page.

Scan the QR code on the control panel.

Note

Normally, the QR code is printed on the label stuck on the

back cover of the control panel.

Tap → Manual Adding to enter the Add Device page.

Enter the device serial No. with the Hik-Connect Domain

adding type.

3. Tap to search the device.

Summary of Contents for AXHub



























































































Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands

HIKVISION AXHub, Manual

Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands