HIKVISION AXHub Manual Download Page 46

Page: 46 / 90

If the option is enabled, the system will detect all radio

peripherals heartbeat. If no peripherals heartbeat is detected,

the system will upload an event.

Note

For EN, do not switch to OFF.

Forced Arming

If the option is enabled and there are active faults in a zone,

the zone will be bypassed automatically.

Note

You should disable the arming function in the Advanced

Settings page. Or the forced arming function cannot be valid.

System Faults

If the option is enabled, the device will upload the system fault

report automatically.

Disable Function Key

If the option is enabled, all function keys will be disabled.

System Volume

The available system volume range is from 0 to 10.

Authority Advanced Settings

Set advanced authority parameters.
Click System → System Options → Advanced Settings to enter

the Advanced Settings page.
You can set the following parameters:
Enable Arming

When you enable the function, during the device arming

procedure, the system will check the configured fault checklist.

When there is fault occurred during the arming procedure, the

procedure will be stopped.

Note

PKG keypad and the keyfob do not support this function. If this

function is enabled, the arming will fail if there is a fault. It is

necessary to eliminate the fault or close the Enable Arming.

Fault Checklist

The system will check if the device has the faults in the

checklist during the arming procedure.

Enable Arming with Fault

Check the faults in the Enable Arming with Fault list, and the

device will not stop the arming procedure when faults

occurred.

Arming Indicator Keeps Light

If the device applies EN standard, by default, the function is

disabled. In this case, if the device is armed, the indicator will

be solid blue for 5 s. And if the device is disarmed, the indicator

will flash 5 times.
When the function is enabled, if the device is armed, the

indicator will be on all the time. And if the device is disarmed,

the indicator will be off.

Summary of Contents for AXHub



























































































Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands

HIKVISION AXHub, Manual

Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands