On the device list page, tap the security control panel and then
log in to the device (if required) to enter the control panel page.
Tap → Partition Management and select a partition, or tap
on the Parition page to enter the Settings page.
Enable the auto arm/disarm function and set the auto arm time/
auto disarm time. You can also set the late to disarm time, entry
delay time, exit delay time, siren delay time, weekend exception
and excepted holiday.
Figure 4-40 Arming or Disarming Schedule Page
Auto Arm
Enable the partition to automatically arm itself in a specific
time point.
Auto Arm Time
Set the schedule for the partition to automatically arm itself.
Late to Disarm
Enable the device to push a notification to the phone or tablet
to remind the user to disarm the partition when the partition is
still armed after a specific time point.
Note
You should have enabled notification fuctions on the Web
Client of the security control panel, or the notification will not
be pushed to the phone or tablet.
Late to Disarm Time
Set the time point mentioned in Late to Disarm.
Weekend Exception
If enabled, Auto Arm, Auto Disarm, and Late to Disarm are
disabled on the weekend.
Entry Delay 1
50
