Check different items to assign permissions.
Single Key Settings
Select from the drop-down list to set I key and II key's
functions
Combination Keys Settings
Select from the drop-down list to set combination keys'
functions.
4. Click OK.
5. Optional: Click to edit the keyfob information.
6. Optional: Delete a single keyfob or check multiple keyfobs and
click Delete to delete the keyfobs in batch.
Add/Edit/Delete Tag (Card)
You can add tag to the security control panel and you can use the
tag(card) to arm/disarm the zone. You can also edit the tag
information or delete the tag from the security control panel.
Steps
1. Click User Management → Card to enter the management
page.
2. Click Add and place a tag(card) on the tag(card) area of the
control panel.
3. Customize a name for the tag(card) in the pop-up window.
4. Select the card type and tag(card) linked partition.
5. Select the permission for the tag(card).
Note
You should allocate at least a permission for the tag(card).
6. Click OK and the tag information will be displayed in the list.
Note
The tag supports at least 20-thousand serial numbers.
7. Optional: Click and you can change the tag(card) name.
8. Optional: Delete a single tag(card) or check multiple
tags(cards) and click Delete to delete cards in batch.
4.3.6 Maintenance
Test
The security control panel supports walk test function.
Steps
1. Enter Maintenance → Test → to enable the function.
Note
Only when all the detectors are without fault, you can enter
the mode TEST mode.
36
