HIKVISION AXHub Manual Download Page 28

Page: 28 / 90

Steps

1. Click Communication Parameters → Event Communication .
2. Enable the target notification.

Alarms and Tampers

The device will push notifications when the zone alarm is

triggered or the device tamper alarm is triggered or

restored.

Life Safety Alarms

The device will push notifications when fire alarm, gas alarm,

or medical alarm is triggered.

Maintenance and Faults

The device will push notifications when any status in the

system is changed.

Panel Management Notification

The device will push notifications when the user operate the

device.

Note

If you want to send the alarm notifications to the mobile client,

you should also set the Mobile Phone Index, Mobile Phone

Number , and check the Notification Type.

Note

For message notification in alarm receiving center, select the

center index before settings.

3. Click Save.
Result

Table 4-1 Options of Notifications

Option

Notification

iVMS-4200

Alarms and Tampers
Life Safety Alarms
Maintenance and Faults
Panel Management

Notification

Alarm Receiver Center

1&2
Alarms and Tampers
Life Safety Alarms
Maintenance and Faults
Panel Management

Notification

Cloud

Alarms and Tampers
Life Safety Alarms
Maintenance and Faults

Summary of Contents for AXHub



























































































Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands

HIKVISION AXHub, Manual

Search results

Summary of Contents for AXHub

Reviews:

Related manuals for AXHub

Brands by name

Popular brands