Hewlett Packard Enterprise HPE ProLiant XL170r Gen10 Maintenance And Service Manual Download Page 35

Page: 35 / 129

4. Install the server into the chassis.

5. Connect all peripheral cables to the server.

6. Power up the server.

Install the primary riser cage

Prerequisites

Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.

Procedure

1. Install the primary riser cage. Make sure that the riser board is firmly seated in its system board the connector.

2. Do one of the following:

•

Install the secondary riser blank.

•

Install the secondary riser cage.

3. If removed, install the bayonet board.

4. If removed, install the bayonet board.

5. Install the air baffle.

6. Install the server into the chassis.

7. Connect all peripheral cables to the server.

8. Power up the server.

Install the secondary riser blank

Prerequisites

Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.

Removal and replacement procedures

Summary of Contents for HPE ProLiant XL170r Gen10


































































































































Search results

Summary of Contents for HPE ProLiant XL170r Gen10

Reviews:

Related manuals for HPE ProLiant XL170r Gen10

Brands by name

Popular brands

Hewlett Packard Enterprise HPE ProLiant XL170r Gen10, Maintenance And Service Manual

Search results

Summary of Contents for HPE ProLiant XL170r Gen10

Reviews:

Related manuals for HPE ProLiant XL170r Gen10

Brands by name

Popular brands