Hewlett Packard Enterprise HPE ProLiant XL170r Gen10, Maintenance And Service Manual

Page: 59 / 129

To replace the component, reverse the removal procedure.
For DIMM configuration information, see the Hewlett Packard Enterprise website ( https://www.hpe.com/docs/arm-
population-rules).
Removing and replacing an HPE Persistent Memory module
For specific population and configuration information, see the memory population guidelines on the Hewlett Packard
Enterprise website (
https://www.hpe.com/docs/memory-population-rules).
To identify the HPE Persistent Memory modules installed in the server, see HPE Persistent Memory module label
identification.
Procedure
1. Observe the following alerts:
CAUTION: Electrostatic discharge can damage electronic components. Be sure you are properly grounded
before beginning this procedure.
CAUTION: Failure to properly handle HPE Persistent Memory modules can damage the component and the
system board connector.
2. Power down the server.
a. Shut down the OS as directed by the OS documentation.
b. To place the server in standby mode, press the Power On/Standby button. When the server enters standby power
mode, the system power LED changes to amber.
c. Disconnect the power cords (rack and tower servers).
3. Disconnect all peripheral cables from the server.
4. Remove the server from the chassis.
5. Remove the air baffle.
6. Remove all components necessary to access the DIMM slots.
Removal and replacement procedures
59