Hewlett Packard Enterprise HPE ProLiant XL170r Gen10, Maintenance And Service Manual

Page: 28 / 129

Remove the server from the chassis
CAUTION: To prevent improper cooling and thermal damage, do not operate the chassis unless all bays are
populated with a component or a blank.
CAUTION: To avoid damage to the server or server blank:
• Always support the bottom of the server or server blank when removing it from the chassis.
• Do not use the release lever to carry the server or server blank.
Procedure
1. Power down the server.
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis:
a. Loosen the release lever thumbscrew.
b. Open the release lever.
c. Use the release lever to pull the server out of the chassis.
Remove the air baffle
CAUTION: For proper cooling, do not operate the server without the baffles, expansion slot covers, or blanks
installed.
Procedure
1. Power down the server.
2. Disconnect all peripheral cables from the server.
28
Removal and replacement procedures