Hewlett Packard Enterprise HPE ProLiant XL170r Gen10, Maintenance And Service Manual

Page: 29 / 129

3. Remove the server from the chassis.
4. Remove the air baffle.
Remove the bayonet board
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1. Power down the server.
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis.
4. Remove the air baffle.
5. Remove the bayonet board:
a. Remove the screws securing the cover to the bayonet board.
b. Remove the screws securing the cover to the server tray, and then remove the cover.
Removal and replacement procedures
29