Remove the primary riser blank
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless either riser blank or
riser cage is installed.
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis.
4. If a secondary riser cage is installed, remove the bayonet board.
5. Do one of the following:
•
Remove the secondary riser blank.
•
Remove the secondary riser cage.
6. Remove the primary riser blank.
32
Removal and replacement procedures
Summary of Contents for HPE ProLiant XL170r Gen10
Page 6: ...Acronyms and abbreviations 128 6...
Page 22: ...22 Customer self repair...
Page 23: ...Customer self repair 23...
Page 24: ...24 Customer self repair...
