4 – Front Panel Configuration & Operation
HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation
4-37
Intraplex Products
Note:
After drilling down to change parameters, you must select
Apply
on this screen and press
Enter for the changes to take effect.
Color Codes: White = currently applied value; yellow = value changed but not saved or applied.
Center Frequency
Select
Center Frequency
on the
RF Profile
front panel screen to access the
Center Frequency
configuration screen (Figure 4-59).
Figure 4-59. RF Profile
Center Frequency
Press these buttons on the display to configure the center frequency:
•
Press
to select the mode to change.
•
Press
to change the frequency value.
•
Press Enter to keep changes until you can
Apply
them on the previous screen.
•
Press Cancel to erase your changes and return to the previous value.
Press the left and right arrow buttons
on the front panel
to move the cursor to the numerical
field or to the double up and down arrows
on the screen. When the cursor is under the
numerical field, press the up and down arrow buttons
to change the value by 0.0250 MHz.
When the cursor is under the double up and down arrows
, press the up and down arrow
buttons
to change the value by a larger amount, typically 1.0 MHz.
You can set a
Center
Frequency
in the range of 944.0000 MHz to 959.8750 MHz.
Color Codes: White = currently applied value; yellow = value changed but not saved or applied.
Cancel: Press this button to return to the previous screen.
Note:
If you make any changes to this screen, you must select
Apply
and press Enter on the
previous screen to save and apply changes.
Bandwidth
Select
Bandwidth
on the
RF Profile
front panel screen to access the
Bandwidth
configuration
screen (Figure 4-60).