HD Link Installation & Operation Manual
6 – Testing & Troubleshooting
Version 2, April 2010
6-4
Harris Corporation
Intraplex Products
Figure 6-6. Contacts Page for Active Transmitter
2.
At
Input Contacts
, check that the
Contact 2 Action
is
Make standby
and the
State
is
Deasserted
(that is, the transmitter is
not
made Standby; it is Active).
3.
On the Web browser interface of the transmitter set to Standby, click
General
|
Contacts
.
4.
At
Input Contacts
, check that the
Contact 2 Action
is
Make standby
and the
State
is
Asserted
(that is, the transmitter is made Standby).
6.1.3.2 Redundant Receiver Testing
●
Check that the front panel display redundancy status (Figure 6-7) shows
for one
redundant receiver and
for the other redundant receiver.
Figure 6-7. Receiver Front Panel Displays with Redundancy Status
●
Check that the front panel display redundancy status also shows
for one receiver and
for the other receiver (Figure 6-7).