HD Link Installation & Operation Manual
4 – Front Panel Configuration & Operation
Version 2, April 2010
4-20
Harris Corporation
Intraplex Products
HD Port Detail
Select
HD Port
on the
Network Setup
menu screen to access the
HD Port
screen (Figure 4-27).
Figure 4-27. Network Setup
HD Port
IP Address:
Access the
HD Port IP Address
detail screen.
IP Netmask:
Access the
HD Port Netmask
detail screen.
MAC Address:
System MAC address.
Oper State:
Whether the HD port is operating (
UP
- green) or not (
DOWN
- red).
Admin State:
Access the
HD Port Admin State
detail screen.
AutoNeg:
Access the
HD Port Auto Negotiation
detail screen.
Speed:
Present HD port speed.
Duplex:
Whether the HD port is running in
FULL
or
HALF
duplex mode.
Back:
Select this command and press Enter to return to the previous screen.
Apply:
Select this command and press Enter to save and set the values shown on this screen.
Remember to select this command to save any changes you have made.
Note:
After drilling down to change parameters, you must select
Apply
on this screen and press
Enter for the changes to take effect.
Color Codes: red = power
DOWN
; green = power
UP
.
HD Port IP Address
Select
IP Address
on the
HD Port
screen to access the
IP Address
screen (Figure 4-28).
Figure 4-28. HD Port
IP Address
This screen shows the IP address assigned to the HD port. Press these buttons on the display to
change this address: