4 – Front Panel Configuration & Operation
HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation
4-19
Intraplex Products
4.1.5.1 Network Setup Menu
Select
Network Setup
on the
System Setup
screen and press Enter to access the
Network Setup
menu screen (Figure 4-26).
Figure 4-26. System Setup
Network Setup Menu
HD Port:
Select this command and press Enter to access the
HD Port
screen to set these
parameters:
●
IP address
●
IP netmask
●
Admin state
●
Auto negotiation
●
Port speed
You can also view the MAC address, the operating state, and the duplex setting on this screen.
Note:
For redundancy, the HD port IP address for both transmitters or both receivers needs to be
identical.
LAN Port:
Select this command and press Enter to access the
LAN Port
screen to set these
parameters:
●
IP address
●
IP netmask
●
Return path
●
Peer IP address
●
Admin state
●
Auto negotiation
●
Port speed
You can also view the MAC address, the operating state, and the duplex setting on this screen.
Note:
The LAN port IP address allows you to manage the HD system via the Web browser interface.
Therefore, always have unique LAN port IP addresses for each HD Link unit (transmitter or
receiver). In redundancy, the two transmitters and two receivers should all have unique LAN
port IP addresses.
Default Gateway:
Select this command and press Enter to access the
Default Gateway
screen to
add or change the gateway IP address.
Back:
Select this command and press Enter to return to the previous screen.