Harris Intraplex HD Link RF Installation & Operation Manual Download Page 113

Page: 113 / 181

5 – Web Browser Interface Configuration & Operation

HD Link Installation & Operation Manual

Version 2, April 2010

Harris Corporation

5-9

Intraplex Products

●

FTP server address

: The IP address for the FTP account on the remote FTP server.

●

FTP password

: The password for the FTP account on the remote FTP server.

syslogd Server

: These fields are available when the

Turn on syslogd server support

check box is

selected.
●

Server address

: The IP address of the sysLogD server.

●

Server UDP port number

: The UDP port number used for communications to the sysLogD

server. The UDP port number used by most sysLogD servers is 514.

Reset:

Click this button to reset all entries on this page to their previous values before any changes or

since they were last saved.

Save:

Click this button to save changes made on this page.

5.3.4

Program Services

The HD Link Web browser interface opens on this page, which shows services installed on audio ports
1 and 2 and status information for these services (Figure 5-8). You can configure bandwidth on this
page as well.

Summary of Contents for Intraplex HD Link RF






















































































































































































Search results

Summary of Contents for Intraplex HD Link RF

Reviews:

Harris Intraplex HD Link RF, Installation & Operation Manual, Page: 113 / 181

Search results

Summary of Contents for Intraplex HD Link RF

Reviews: