Harris Intraplex HD Link RF Installation & Operation Manual Download Page 108

Page: 108 / 181

HD Link Installation & Operation Manual

5 – Web Browser Interface Configuration & Operation

Version 2, April 2010

5-4

Harris Corporation

Intraplex Products

5.3.3.1 Current Alarms

Click this command to view an alarm event table of specifics for current alarms (Figure 5-3).

Figure 5-3. Alarms | Current Alarms Page

Date:

The week day, month, day of month, year, and time (hh:mm:ss) the alarm occurred.

Severity:

Whether the alarm was

Major

(red),

Minor

(yellow), informational (no color code), or the

clearing of a major or minor alarm (no color code).

Description:

A brief explanation of what triggered the alarm.

Clear current alarm table

: Click

on the table header to remove all alarms on this table.

Clear this alarm from the table

: Click

on the specific alarm row to remove that alarm row from

the table.

5.3.3.2 Alarm History

Click this command to view an alarm event table showing all alarms that have occurred since the
system started/powered up (Figure 5-4).

Summary of Contents for Intraplex HD Link RF






















































































































































































Search results

Summary of Contents for Intraplex HD Link RF

Reviews:

Harris Intraplex HD Link RF, Installation & Operation Manual, Page: 108 / 181

Search results

Summary of Contents for Intraplex HD Link RF

Reviews: