Harris Intraplex HD Link RF Installation & Operation Manual Download Page 147

Page: 147 / 181

5 – Web Browser Interface Configuration & Operation

HD Link Installation & Operation Manual

Version 2, April 2010

Harris Corporation

5-43

Intraplex Products

●

“Bad Value” Errors

: Total number of SNMP PDUs received by the SNMP Agent for which the

value of the error-status field is “badValue” (

Receive

) or total number of SNMP PDUs generated

by the SNMP Agent for which the value of the error-status field was “badValue” (

Send

)

●

Generic Errors

: Total number of SNMP PDUs received by the SNMP Agent for which the value of

the error-status field was “genErr” (

Receive

) or total number of SNMP PDUs generated by the

SNMP Agent for which the value of the error-status field was “genErr” (

Send

)

●

“Bad Version” Errors

: Total number of SNMP messages received by the SNMP Agent for an

unsupported SNMP version.

●

“Bad Community” Errors

: Total number of SNMP messages received by the SNMP Agent using

an SNMP community name not known to the entity (

Receive

) or total number of SNMP Messages

received by the SNMP Agent representing an SNMP operation not allowed by the SNMP community
named in the message (

Send

)

●

“Write to Readonly” Errors

(receive only): Number of errors due to an attempt to write to files

that are read-only.

●

ASN Parsing Errors

(send only): Total number of ASN.1 or BER errors encountered by the SNMP

Agent when decoding received SNMP messages.

5.3.9.4 TCP/UDP Statistics

You can view TCP segment and UDP datagram statistics on this page (Figure 5-36).

Figure 5-36. Performance | TCP/UDP Statistics Page

UDP Statistics

●

Datagrams received

: Total number of UDP datagrams received by the HD Link system from the

network.

●

Datagrams sent

: Total number of UDP datagrams sent by the HD Link system to the network.

Summary of Contents for Intraplex HD Link RF






















































































































































































Search results

Summary of Contents for Intraplex HD Link RF

Reviews:

Harris Intraplex HD Link RF, Installation & Operation Manual, Page: 147 / 181

Search results

Summary of Contents for Intraplex HD Link RF

Reviews: