4 – Front Panel Configuration & Operation
HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation
4-35
Intraplex Products
incoming audio signal). However, you can set the receiver to pass audio signals when in Standby
mode if you prefer.
Color Codes: White = currently applied value; yellow = value changed but not saved or applied.
Cancel: Press this button to return to the previous screen.
Note:
If you make any changes to this screen, you must select
Apply
and press Enter on the
previous screen to save and apply changes.
4.1.6
Service Setup Screens
Select
Service Setup
on the
Main
front panel screen to access the
Service Setup
menu screen
(Figure 4-56).
Figure 4-56. Main
Service Setup Menu
RF Profile:
Select this command and press Enter to access the
RF
Profile
screen to set parameters
for
●
Center Frequency
●
Bandwidth
●
Max Modulation Order
●
Output Power
Radio Parameter Status:
Select this command and press Enter to access the
Radio
Parameter
Status
screen to view status for
●
Modulation
●
Coding Rate
Service Profile:
Select this command and press Enter to access the
Service
Profile
screen to set
parameters for
●
Audio Port 1
●
Audio Port 2
●
Aux 1
●
Aux 2
●
User IP
Service Sync:
Select this command and press Enter to access the
Service Sync
configuration
screen.
Back:
Select this command and press Enter to return to the previous screen.
Figure 4-57 shows a flow chart of screens to which you can drill down from the
Service Setup
menu
option.