![background image](http://html2.mh-extra.com/html/hand-held-products/scanteam-2070/scanteam-2070_system-manual_3568137094.webp)
4 - 4
Backlight Control
A backlight is provided for viewing the display in darkened area. Backlight control
is a scanner independent control, not part of the work group settings.
To access the backlight control, press and release the
FN
key, then the
BACK
(
BK
) key. The backlight control opens, and the setting immediately changes.
Each time the
BACK
key is pressed, the backlight toggles between two states:
SCRIPT
and
ON
. Other keys will have no effect.
The backlight control closes when you pull the trigger or press any key (other
than the
BACK
key), or when a timeout expires. When the backlight control
closes, the new setting is saved and the display screen is restored.
SCRIPT
is
the default setting. In the
SCRIPT
state, the script application controls the
backlight. In the ON state, the backlight is on regardless of the script application.
Battery/Radio Indicators
To view battery and radio status, press and release the
FN
key, and then the
wildcard key (*). System icons and 4-segment bar graphs indicate battery
strength and radio contact with the base. The battery and radio status view
closes when you pull the trigger, press any key, or when a timeout expires. If the
radio is in communication with the base, you will receive a signal indicator. If the
radio is out of range from the base, if there is no power to the base, or if the
scanner is not associated with a base, no radio indicators display.
Note: If the battery is low and you pull the trigger and a battery appears in the
bottom right of the display, or the aiming line does not illuminate, you
should charge the battery.
ON
SCRIPT
Charged Battery Indicator
Low Battery Indicator and
Loss of Radio Contact
with Base
and Radio Contact with
Base
Summary of Contents for SCANTEAM 2070
